Overview

Print
PDF

Electrocoating Tecnology

Electrocoating Process

Thanks to the voltage difference at the anode (the end), the negatively charged lacquer particles, will be deposited ONLY on areas where the metal is in contact with the lacquer fully covering any scra- tches on the inside or outside of the end, on the curled cut edge, the score line, the smile beads, rivet area and tab cut edge.

This is the most technologically advanced method for protecting metals by applying a coating.

Print
PDF

Automation Machinery

Automatic Plastic Wrapper

Description:

This machine has been developed to automatically shrink wrap steel and aluminium ends.

The ends coming from the production lines are counted (accuracy ± 1 end per sleeve), separated into a stack and then picked up by a gripper. The gripper moves on a system of x-y axes and transports the stick to the wrapping station, where it is wrapped using micro-perforated plastic film, heat-sealed longitudinally and then heat shrunk by hot air blowers during transport through a step roller conveyor to the outfeed of the machine.

Continue Reading...

Automatic Plastic and Paper Unwrapper Machine

Description:

This machine is used  to automatically feed  one or more seamers with unwrapped sticks  of ends that

were previously shrink-wrapped with plastic film or ends in paper bags.

The machine takes the  sticks  of ends from the  hopper.

In the paper project, a knife  cuts  the  paper bag longitudinally and it is then ejected into a collecting bag.

Continue Reading...

Automatic Paper Bagger

Description:

This machine automatically collects, counts and puts  the ends coming from one or more production lines into pre-made paper bags.

The paper bags  are  stored in a dedicated section with an autonomous capacity of 500 pieces.

Here a special pneumatic arm takes the  bags  and places them in the  bagging station where they  are opened by means of an air blast before the  stick of ends  is pushed inside.

Continue Reading...

Dual Or Single Box Snake Wrap Palletizer

Description:

This machine has been developed by CORIMA to automatically palletize pre-made sleeves of ends applying a paper or plastic “snake wrap” between the layers to form a tight and secure pallet load. The sleeves are carried by a conveyor into the machine.

Here, the  sleeves are  picked up by the  pick & place  unit and placed on the pallet where the  same unit handles the  paper or plastic roll to form the desired snake pattern.

Continue Reading...

Automatic Scroll Strip Feeder

Description:

This machine is designed to transfer strips from the  outfeed of a scroll shear into the  hopper of a strip feed  press. Depending on the type of scroll shear deployed, different collection conveyors may  be used.

This unit can receive scroll strips from a scroll shear with an integrated outfeed conveyor or from a model  ALP 20 or ALP 30 conveyor.

The conveyors feed  strips according to the  needs of the  press, maintaining a constant height of the stack of strips in the  press hopper.

Continue Reading...

Automatic Double Sheet Stacker

Description:

This unit provides automatic and continuous stacking of printed or coated sheets; installing this system at the  outfeed of coating and printing lines increases productivity and gives a saving  on manpower.

Automatic stack changeover on the  sheet feeder in front of the  line can be done  while the  machine is in continuous operation, without  stopping the  line.

Continue Reading...

Print
PDF

Easy open end lines

Focus On New Tooling

Description:

The machines we supply  will feature all new components with the  exception of the  frame. The press will be equipped with:

  • New conversion die;
  • New tab die;
  • New electrical cabinet;
  • New PLC...

Continue Reading...

Conversion Line

Description:

Alongside, we illustrate some examples of the  special Tinplate Full Panel  Easy Open ends or  Aluminium easy open lids that CORIMA presses can manufacture.

Different sizes such as: ø153 full open, Rectangular steel, Hansa  steel, Aluminium easy open lids...

Continue Reading...

Print
PDF

Quality Control Machinery

Can Vacuum Tester

Description:

This machine is ideally installed directly in the  production lines.

It has  an extremely simple operating principle for the  total elimination of defective cans (pin holes,dented flanges, cracked flanges, cracked welds, etc.).

Standard vacuum degree is applied  to cans  and those found  faulty  will be automatically rejected.

Continue Reading...

Pin - Hole Detector

Description:

The CORIMA Pin-hole  Detector is an extremely sensitive photoelectric device with high signal conver- sion efficiency and optimum response time.

This machine is designed for the  total detection of tiny holes  having  a minimum area of 0.025 mm (hole ø 0.001”) in moving strips of steel or other materials.

The machine is ideally installed on coil cutting lines or special sheet inspection lines to guarantee a top quality  inspection service.

Continue Reading...

Who's Online

We have 22 guests online

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of the site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

I accept cookies from this site.

EU Cookie Directive Module Information